Cornett's Corner

Toolbox Talk: Is There Ever Justification for Not Working Safely

“IS THERE EVER JUSTIFICATION FOR NOT WORKING SAFELY”

Is there ever an acceptable excuse not to work safely? In one sense or another we get confronted with this question every day.
There are deadlines and people looking over our shoulders (sometimes literally), or the weather is nasty and we want to take that little short cut to get the job done quicker.

All the pressures and temptations we face every day ask this same question: “Is there ever an excuse not to work safely?”
We sometimes want to say, ’’Maybe just this one time I will take a chance. I can get away with it once.” Unfortunately, that seems to be the time when we have our worst injuries.

There is a real life example from a Machine shop. The rule in the shop (as in our shops) is that no running is allowed. The head sawyer was finishing a job and the truck picking up the order was literally waiting for the last piece. When the cut was finished, the sawyer grabbed the part and ran towards the delivery truck. It was 2:30 in the afternoon and the sun was at the perfect angle to blind him as he came around a corner. The sawyer kept moving quickly towards the delivery area. He noticed that there was a forklift parked but assumed that it was in the normal parking spot and that it would not be a problem.

The forklift was not in the normal parking spot and someone left the forks off the ground while they went to arrange a pallet they were about to pick up. The sawyer caught his right foot under the forks. The foot literally jammed between the fork and floor. He suffered an almost complete tearing of several ligaments and tendons as well as two hairline fractures. His ankle required surgical repair and there is some doubt he will ever return to his old job.

If you were to ask this man if he had an excuse for not working safely he would probably reply that he was trying to impress the customer. If you asked him if it was worth it, the answer would be obvious. Did the sawyer know the rule about not running in the shop? You bet he did. By running in the shops he did not have time to avoid an unforeseen hazard and was seriously injured.

The vast majority of industrial injuries are the result of people doing something that they know is wrong. We might think that the rule can be broken just this once. However, the reason most company safety rules and most OH&S legislation is in place is because someone was seriously injured or killed not following the safest work practice. If you think what you are about to do is unsafe, it probably is. Stop and think about it. Is there ever justification for not to work safely?

“Deliberate success occurs when preparation and opportunity intersect.” Eric Allenbaugh

Thanks for the share TO!

Heidi

Share
Published by
Heidi

Recent Posts

Body Found in PA Cole Mine

Body Found In PA Mine UNITY TOWNSHIP, Pa. (KDKA) — The body of Elizabeth Pollard,…

7 days ago

Today’s Quote

"Healthy responsibility is defined as taking 100 percent responsibility for yourself while inspiring others to…

7 days ago

Twelve Hour Shifts

Twelve Hours Shifts have been debated for many years as to their pros and cons.…

7 days ago

Hypothermia and Frostbite

Hypothermia and Frostbite Even skin that is protected can be subject to frostbite. It's the…

1 week ago

Safety Tidbits

Safety Tidbits December is Mental Wellness & Holiday Safety Month Tips • Exercise your mind…

1 week ago

Today’s Quote

The Courage of Integrity (anonymous source) "The highest courage is to dare to be yourself…

1 week ago

This website uses cookies.